Welded ceramic pins. Welded pins (studs). Reinforcement system of masonry

Ceramic facing brick one of the most popular facade materials. It is traditionally used for the design of private houses, respectable hotels, prestigious shops and boutiques. Brick attracts consumer with its magnificent aesthetic characteristics and practicality, at home from this material can stand in centuries. To make the exterior of the facade remained the same as immediately after the end of construction, the masonry reinforcement systems use. They are today an integral part of the technology of ventilated facades, where brick is used as a facing material.

Reinforcement system of masonry

Thanks to the fasteners industry, it is easy to reinforce the brickwork today and simply. The main elements of the system are fittings and mounting plates. For reinforcement of brickwork, corrugated reinforcement rods from high quality galvanized steel with a diameter of 4 mm are used. The simplicity of their mounting on the surface of the bricks provide fastening plates of the original design. Their corners bent down to ensure reliable fixation with the base. On the surface of the plates there are several rows of triangular teeth, between which fittings are fitted. For the reliability of the fixation, they have a chess order and clamp a rod on both sides, preventing his rolling to the side. The plate is designed for laying two parallel row of reinforcement, it lifts the rod to a certain height, completely immersing them into the solution. Such reinforcement of masonry significantly increases its reliability and durability.

Venting brick masonry

The system of mounted facades from the brick necessarily includes a layer of thermal insulation material. It is characterized by good vapor permeability, but it is capable of accumulating moisture. This can lead to loss of operational qualities, so the design provides a ventilation gap between thermal insulation and facing bricks. The question arises - how will the air go to this system? To do this, the masonry ventilation was developed, which is a narrow box of polymer material inserted into vertical seams between bricks. From the outdoor, it has a grid that prevents rodent penetration. Ventilation in the brickwork is mounted in the lower and in the upper row, every 2-3 bricks. This ensures excellent air circulation and high-quality dilution of excess moisture.

In construction, the quality of fasteners is no less important than the construction materials used. Therefore, the company "Slavd" offers its customers only proven fastening systems. In this section in a wide range of BEVER stainless steel anchors, basaltoplasty (Galen) and fiberglass (Biysk), armature for brickwork.

Among this product, there are flexible connections for brickwork, concrete. Also in the company "Slavd" you can purchase fasteners for a full-length, porous and wooden base, flexible links of insulation of monolithic bases, concrete and thermoblocks. Our qualified managers are always ready to suggest products and answer all your questions.
According to European construction standards, the use of fasteners has long been no additional accompanying material, but the reinforcement of brickwork is the norm. With the correct use of anchor, the carrier wall is superplicated, providing reinforcement of brick walls.

What are the advantages of reinforcement?

Unfortunately, more and more often, we hear in the news "collapsed brickwork or part of the wall. Moreover, sometimes we observe such cases with newly built houses. All this is connected either attempting to save money on brickwork reinforcement, or with a weak market awareness of products that helps strengthen brickwork.

We offer anchors that are used to strengthen brick masonry from basaltoplasty (the so-called basaltoplastic fittings), fiberglass and stainless steel. It is very important that flexible connections are used from these materials. As an example: in the cutting of ferrous metal corrosion, partial collapse of the building occurs within a few years after using the EE as a flexible connection. From the 60s in the UK, the clogged and the anchor invested only from stainless materials is used.

All anchors have passed the tests in accordance with the requirements of GOST. Anchors allow brick reinforcement, wood, reinforcement of blocks (including reinforcement of aerated concrete and foam concrete).

The welded pin TEHNONIKOL is components for the fastening of flame retardant and thermal insulation materials to the metal structures of the air ducts, made of carbon steel and is protected by a resistant copper anti-corrosion coating. There is a tip for contact welding with condenser welding equipment.

Washer clamping technology from carbon steel with resistant anti-corrosion coating. Has an elastic cut reliably locking the puck on the pin. Designed for fastening flame retardant and thermal insulation materials to metal structures of air ducts using specialized contact type welding machines.

TEKHNONICK COMPLETICS SPECIALS is widely and successfully in demand in modern construction when creating air ducts.

Specifications

Storage

• Storage on covered dry warehouses.

• Pickup. You can pick up the ordered batch of goods from us or directly from the warehouse of the manufacturer. At the same time, it is advisable to harmonize the time of export with the manager of the company - this will help you to prepare a batch for shipment in a timely manner and do not delay the car.
• Delivery of plant transport. Some manufacturers bring goods on their own machines. For example, the factory Tekhnonikol from Ryazan is ready to transport its products to almost anywhere in the Russian Federation and provide additional transit services. In the fleet of the company there is a technique with a carrying capacity from 1.5 to 20 tons. All services are provided at an optimal cost. The price list can be found on the website of the plant.
• Soup delivery by side. Each client can use the services of a third-party transport company. You can find out the cost of transportation from the manager of the company that provides the service. It is also advisable to agree on the date of the export of goods with us.

• Private faces make money in cash when receiving a product or in the office of LLC GK Vesta.
• Legal entities have the opportunity to translate funds to the company's current account.
• Sending goods to other regions of the country is carried out after making 100% prepayment. In Moscow and Moscow region is calculated in cash on the fact of delivery.

The air duct system must be protected by flame retardant material. The highest quality and absolutely proven material is the flame retardant by Matha Vaeur Mat. For fastening Wired Mat requires welded equipment with welded pins. Welded pins differ in length, but the most important thing is to choose the type of fasteners.

There are two types of main fasteners:

1 type
The fastening of the welded pins occurs on the air duct body, followed by the installation of insulation Vairem mat. Sp-TS-2.0 welded pins with a diameter of 2 mm, on sale length 19, 25, 32, 42, 51, 63, 76, 89, 105 and 114 mm. For SP2.0 pins, steel locking washers are required, which you can purchase with a diameter of 30 and 38 mm. For this fixation you will need welding equipment PW-33 or CDI 1502 with a C08 pistol.

2 type
The fastening of welded pins occurs through the surface of the mats Vaires mat to the air duct body. CDF3 welded pins with steel washer with a diameter of 30 mm and CDF3-ISOL welded pins with a steel fixing washer with a diameter of 30 mm and an additional insulation at the base of the heel. The diameter of the spicy part of the stud is 2.7 mm. The welded elements of CDF3 and CDF3-ISOL are produced in length 15, 19, 25, 28, 38, 48, 58, 68, 80, 90 and 100 mm. For this type of welded needles, you will need CDI 1502 welding equipment with the CL 03 pistol.

Example:
To make Matte Matte Vaire Mat 50 mm thick need a welded element SP-TS-2,0 with a length of 48 mm and so on.

Welded Pins Sp and Blocking Washers CL

Welding machine PW-33 (Belgium) or CDI 1502 with a pistol C 08 (Germany) is used for welding pins of this type.

For the welding of pins of this type, a welding machine of type CDW 45-4 (Belgium) and CDI 1502 with a Pistol CL 03 are used.

Welded pins CDF-ISOL

Designed for welding through material with coating aluminum reinforced or unarmed foil. To fix the pins of this type, a welding machine of type CDW 45-4 (Belgium) and CDI 1502 with a Pistol CL 03 are used.

Video: welded pins

Send request You can by email [Email Protected]website

Washers blocking for welded pins