Canadian projects of one-story houses made of timber. House projects using Canadian technology. Modern methods of building Canadian houses

When working with us, clients invariably receive a number of additional benefits. In particular, a five-year guarantee applies to the entire range of services.

How to build a frame house using Canadian turnkey technology at minimal cost

Currently there are quite a lot modern technologies used in construction. But build frame houses turnkey is still the most profitable. The final cost of the house project suits all clients who do not plan to spend a lot Money, wait a long time to move in. It is worth considering the construction frame houses turnkey makes it possible to immediately after the construction of walls and roof full finishing, since the buildings do not shrink, which means you won’t have to wait for several years to move in.

The unique Canadian technology for constructing frame houses, the price of which is also considered the most affordable of all available technological construction options, allows you to save money and not give up additional cubic capacity, which will cost several times less than, for example, the same area when building with brick. We will install the house taking into account all the norms and requirements that apply in modern construction. Intel Group specialists have extensive experience in providing such services. Currently build frame house using Canadian turnkey technology is possible with additional promotional discounts.

The most affordable price for a frame house using Canadian turnkey technology will allow you to solve your housing problem in a short time, rather than putting it off indefinitely. The practical technology for building a turnkey house using the Canadian system was developed taking into account the peculiarities of the climatic conditions of Russia. A frame house will be warm even in regions with harsh conditions; for example, in the Far North, such buildings have proven themselves to be excellent even in cold winters.

Millions of owners have already assessed Canadian homes and were satisfied with all the conditions of construction, payment, and most importantly, received comfortable, modern, warm and cozy housing. Our prices for the construction of turnkey Canadian frame houses will suit the most demanding client.

Initially, you need to order a foundation for the construction of houses using frame technology according to the selected project. Features of the technology for constructing prefabricated houses make it possible to make lightweight pile foundations. This, in turn, is a guarantee that all work will be completed in the shortest possible time; the cost of the foundation itself will be 30-50 percent lower than when using traditional technologies.

Accordingly, the price frame construction at home is immediately reduced at the zero stage. Only Canadian technology for constructing frame houses, the price of which has been reduced, allows for significant savings, which is why such options are increasingly being chosen by citizens who have dreamed of owning their own home for a long time, but for one reason or another did not dare to start construction.

The quick execution of house projects at Intel Group is carried out by highly professional engineers who always take into account the basic requirements of the client. If necessary, you can opt for standard designs. Only we provide house construction services at the most affordable prices, if you compare the price lists of companies in Moscow or other large cities in Russia.

You can find out what the price is for a frame house using Canadian turnkey technology on our website or at the company’s office during a personal visit. We will build a house quickly and conclude an official cooperation agreement with each client who contacts our company. The catalog contains a large selection of standard designs. This means that we will build a house according to individual drawings or a finished project, which has already been tested and worked out taking into account all the wishes of our clients. The price of the house will completely suit you.

Canadian houses, so popular in Canada, the northern states of the United States, and other countries with a temperate continental climate, are considered energy efficient, inexpensive and quick to build. Thanks to their technological advantages, they can compete with traditional methods of building private housing from brick or aerated concrete.

Main design Canadian houses is a wooden frame based on durable timber. Before installing frame houses using Canadian technology, a reinforced concrete driven or pile-screw foundation is installed.

The frame of a Canadian house consists of vertical wooden supports, which are located at a distance of 60 cm from each other. The distance between the pillars is designed in such a way that it is possible to easily cover the house with OSB panels, which strengthen and connect the entire structure. The load-bearing pillars are connected at the top by floor joists 200x50 mm made of calibrated beams.

OSB boards are mounted on beams using standard hardware. The house is insulated using 200mm non-flammable ECO insulation using hydro-vapor barrier membranes. Thanks to the treatment of wood with a deep-penetrating fire-bioprotective composition, the finished structure is reliably protected from fire.

The price of building frame houses using Canadian technology is not fixed. You can check out approximate cost, having studied examples finished projects on the WoodHouse website. For consultation, call the manager or order a call back!

IN last years In Russian construction, the share of frame houses developed using Canadian technology has increased. Subsequently, they were improved by craftsmen from Germany, Finland, and Sweden, who made various additions based on the climate conditions in a particular country.

Canadian frame houses are built in the form of a multi-layer pie. First, a frame is made of timber, and then special panels, which consist of several layers, are fixed to this structure. The insulating material is placed between two layers made of chipboard.

Siding, lining or false beams are then sewn onto the panels, placing a special film under them, thanks to which the structure is protected from negative influences environment and temperature changes.

Benefits of Canadian technology solutions

Houses using Canadian technology are usually chosen by middle class people. What are the advantages of this type of construction?

• The buildings are erected at economically advantageous prices. Each of the frame-based buildings costs half as much as the brick version.
• The building is erected quickly in comparison with other technological solutions.
• The presence of warmth and good atmosphere in the house.
• Energy costs are saved.
• Maintenance of the building is cheaper compared to stone houses.
• Ease of repair work.
• There is no need to install a heavy and expensive foundation.
• Possibility of a large choice. The house can be built according to standard project and economy class style.
• Originality of architectural solutions.
• Construction can be carried out on any site.
• Communication can be done simply.
• If necessary, a building created using Canadian technology can also be quickly dismantled and installed in a new location. Which is a clear advantage of such frame buildings.

Negative points

Construction of houses using Canadian technology, unfortunately, has some negative sides. If the structure is assembled incorrectly, you may encounter high heat losses. But the house should provide ventilation so that the thermal insulation layers do not rot.

When assembling the structure, attention should be paid to the choice of material. The raw materials must be dry. If you ignore this, then mold and cracks may appear, as a result of which the structure may completely collapse.

Frame houses have lower sound insulation than buildings with denser materials. But if during assembly you install an additional layer of material that prevents sound and noise, then this negative point is completely eliminated.

Stages of building houses based on Canadian technologies

Before construction begins, you can view photos of houses, the construction of which is carried out using a variety of technologies, including Canadian ones.

Having decided on the design of the future building, it is necessary to develop a project. You can draw it yourself or seek help from people knowledgeable in this area. Having received a project for a Canadian house, you should purchase all the building materials necessary for construction.

After clearing the area allocated for construction from various debris, grass and bushes, you should work on the base site, which will serve as the basis for the rest of the structure. The foundation and floor act as the base platform.

Initially, it is necessary to arrange a rough version of the floor. The structure is made from the cheapest materials, which are unedged boards. You need to know that the walls and floors in Canadian-style houses are made from the same type of wood.

To ensure the stability and reliability of the frame structure during construction, special reinforcement is laid and poured concrete foundation. A few weeks after pouring the foundation, it is necessary to lay boards that will help indicate the location of walls and rooms in the future structure.

To prevent rotting, the wood should be treated with antiseptic agents. A layer of roofing felt and insulation should be placed between the foundation and the boards. The boards are reinforced with special anchor bolts.

After the floor is made, you can begin to build the walls, checking their levelness using a level. If you do not comply with this, then there may be a distortion of the structure in the future.

First, the lower trim is constructed in the form of a beam, which has special grooves. Vertical boards about 2.7 meters high are measured and sawn. Then steel pins are inserted into the locations of the racks. Assemble the frame from the corner. The bars are inserted into the dowels and then secured with temporary jibs. The installation of intermediate bars is carried out similarly.

At the next stage, the top trim is carried out. To do this, it is necessary to use similar bars with grooves, which are used in the process of lower strapping. The top trim is fixed with nails.

After the frame is made, the temporary jibs are dismantled and replaced with permanent ones. This will help give the structure additional strength and relieve part of the load.

Then the ceiling beams are fastened. They are made from bars measuring 5 by 15 cm. There should be a half-meter distance between the beams. Make sure that the beams and racks placed vertically do not coincide. A beam should be installed in the house as a support in place of the partition between the rooms.

Rafters are installed on top of the frame. Their role is played by boards with a thickness of 5 cm and a width of 10 cm. Then the lathing should be laid at an angle of 45-50 degrees.

The rafters are fastened with 15 cm nails. To make the structure durable, a ridge board is placed on the central rafters. At the next stage, the sheathing is performed, followed by laying roofing material on it. Then roofing material in the form of slate or tiles should be laid on its surface. Slate nails help with fastening.

In the future, it’s worth taking care of the outer wall cladding. Initially, take the boards and cut them depending on the size of the frame. The back wall is sheathed last.

Attaching the first board starts from the bottom. A board is attached to each of the racks with 5-centimeter nails. It is worth making sure that the connections and grooves fit tightly. After the entire frame is sheathed, it is worth using a sealant to protect it from the negative influence of the environment.

If all precautions are strictly observed at each stage, a high-quality house will quickly be obtained. You can build it yourself or with the help of professionals. In any case, it is worth reviewing all the pros and cons of the designs in order to avoid unpleasant moments in the future.

Photos of Canadian houses

Thanks to the speed of construction, country houses based on Canadian technology are widely in demand on the market countryside real estate, especially since they can be simply ordered on a turnkey basis. This construction method is very common in Canada, which is what gives houses built using this technology their name. Well, since the climatic conditions of Canada are close to domestic ones, the methods of constructing suburban housing developed and tested in this country are relevant for Russian buyers. What houses can look like using Canadian technology: projects, prices, photos in our article.

Small frame house built using Canadian technology Source karkas-nsk.ru

Canadian houses: a little history

The first frame buildings were known in Europe during the early Middle Ages. In those days, the structure was based on a system of posts and beams with braces located diagonally. The space between the parts of this frame structure was filled with stone, bricks or clay.

Colonists who came to Canada and the United States from Europe used this technology, which allowed them to create houses at any time of the year in a short time. To protect against the harsh weather conditions of Canada, the walls of the houses were covered with boards on the outside and inside, and the voids were filled with any available material. Most often a mixture of clay, straw, sand and stone was used.

Houses in old European cities are “distant ancestors” of modern frame technology Source nkkconsult.ru

Thus, the basis for creating houses using Canadian technology even in those days was the prototype of insulated panels, with the help of which it was possible to build a high-quality warm house in the shortest possible time. Modern technology of “Canadian houses”, adapted for harsh climatic conditions, has a number of advantages and disadvantages.

Advantages of modern Canadian houses

A frame house using this technology is built from panels covered with OSB (a material made from wood chips impregnated with polymer resins) and insulated with polystyrene foam. The dimensions of the panels are selected individually, taking into account the size of the finished building. Insulated panels are ready-made wall elements that are fixed on a pre-built foundation. After this, the installation of floors, roofs, as well as doors and windows occurs.

• The main advantage of the technology is the speed and ease of building a house. Installation work do not require the use of specialized equipment and a large team of builders; on average, a house is erected within 2-3 months.
• A frame structure using Canadian technology will cost about half as much as a full-fledged one brick house, while the functional characteristics of both buildings are similar.

Facing brick in the design of a frame house Source karkasblog.ru

• Lightweight panels do not require the construction of a powerful foundation, so they can be built on areas with any terrain.
• Expanded polystyrene, filling the space between the panels, has high insulating properties. Therefore, the finished building does not require additional sound insulation and insulation.

Unlike dwellings made from beams or logs, Canadian wooden houses allow installation of utilities inside the panels themselves. Thus, finished living spaces look more aesthetically pleasing, and less time and effort is spent on installation.

• Wooden panels at the base of the frame create a pleasant atmosphere in the house.
• Lightweight wall material allows you to choose various ways external finishing of the finished building: decorative brick, plaster, boards - all this is available to owners of frame houses built using Canadian technology.
• Thanks to the production of custom-made panels, the finished structure can have almost any architectural form.

Video description

More about the advantages of Canadian houses in the video:

Disadvantages of building a house using Canadian technology

Despite many obvious advantages, houses using Canadian technology have a number of features and limitations, due to which they are not suitable for all owners of suburban areas. The main feature of the technology is the limitations on the dimensions of the finished building. The height of each floor should not exceed 3 meters, there can be a maximum of 3.

The compactness of Canadian houses does not affect their functionality and pleasant appearance Source avantage-dom.ru

The environmental friendliness of the finished building may raise questions due to the abundance of polymer resins impregnating the product. However, this is a question of the integrity of the manufacturers of such structures - if the panels are made in compliance with the technology, then they comply with all environmental safety standards.

The characteristics of a finished residential building, in addition to the quality of the material, are also determined by the professionalism of the team of workers. If the contractor’s integrity combines with high-quality components and finishing according to all the rules, then a Canadian house is a comfortable and durable home.

Features of the components of frame houses

Regardless of the technology chosen, the construction of a house using Canadian technology will be carried out in several stages. When choosing a material for each element, it is necessary to take into account its functional characteristics.

Foundation

Common option for construction frame structures – strip foundation, which is a concrete structure immersed in the ground by about 50 cm, the height above the ground is 20-30 cm. With correct calculations, a strip foundation allows you to erect a residential building on various types of soil, including waterlogged and mobile ones. The main disadvantage of such a foundation is the inability to carry out a global redevelopment of the house over time.

Ready-made strip-column foundation “in cross-section” Source emupauto.ru

Screw foundations can be sunk to a considerable depth, which makes it possible to use them to create a foundation for a house on difficult soils. The main disadvantage is that noticeable shrinkage of the structure is likely, especially if there are errors in calculations or violation of technology. As a result, with a fine finish after completion construction work will have to wait a while. In addition, neither about the basement nor about ground floor there is no need to think in such a house.

Screw foundation made of metal piles Source 72.ru

The most reliable option is slab foundation, which is a flat reinforced concrete “pillow” on which the structure is erected. Due to its high cost, it is usually not used when building prefabricated houses using Canadian technology, but on sandstone or when there is an abundance of groundwater, this may be the only possible option.

Schematic diagram of creating a slab foundation Source profundamenti.ru

Most often, the cost of the foundation is calculated separately from other work on the construction of a frame house. Experienced specialists will help the customer choose the optimal type of foundation depending on the characteristics of the building and the surface on which it will be built.

Floor covering

The future floor is based on floors made of wooden beams, which are located on the foundation of the house. Most often, slabs made to order along with materials for the walls of the house are used to cover the ground floor. Installation of this part of the house is carried out immediately after preparing the foundation; the joints of the slabs are carefully treated with sealant. The next layer consists of insulation and vapor barrier materials. After this, a finishing coating, for example, laminate, is placed on the finished “rough” floor.

Subfloor with insulation, prepared for finishing Source indigostroy.com

The floor on the second and third floors is constructed in the same way, while the amount of insulation and vapor barrier material used is less than for covering the first floor. Soundproofing materials come to the fore here, ensuring comfortable living.

The basis of the structure on the second floor is the floors on which the subfloor, insulating materials, slabs and fine finishing(for example, linoleum).

Material for house walls

Regardless architectural project, Canadian frame houses are based on SIP panels, which are particle boards with a layer of insulation. As a rule, such elements are installed without an additional frame, but at the request of the customer, the house can be further strengthened.

Appearance of high-quality SIP panels in stock Source sipanel174.ru

If necessary, thermal insulation boards made of mineral wool are added between the frame elements.

The outside walls are covered with film to protect against the penetration of moisture and wind.

The construction of houses using Canadian technology involves the use of various facing materials: siding, facade panels made of composite materials, porcelain and stone tiles, plaster or wooden boards. At the same time, depending on the chosen option, the facing materials will be attached to the wall surface differently.

Modern materials help create any exterior decoration Source mastersmi.com

Regardless of the type of finish chosen, it is necessary to consider ventilation gaps, which help free air circulation and prevent moisture accumulation. Thus, the final wall thickness consists of the panel, internal and external finishing, as well as technological gap.

Roof of a Canadian house

The chosen shape and materials for the roof of a house depend entirely on the amount of precipitation, climate, and wind intensity.

The main material for the roof is SIP panels placed on wooden rafters (strong beams that form the slopes of the future roof). If necessary, additional thermal insulation is fixed to the panels.

After this, the roofing material is selected. The most common option is a metal profile - sheets of various shapes that protect the roof from external influences. For the comfort of residents, such material must be equipped with sound insulation so that the sound of rain is heard less.

An alternative option is soft bitumen shingles, which are lighter and easier to install.

The choice of roof shape is limited by the average amount of precipitation and the taste preferences of the customer. For example, budget houses most often have a standard gable roof. It prevents water retention, neutralizing the possibility of leaks, and also allows you to equip a spacious attic space.

Laconic house with a gable roof Source planlook.ru

Multi-pitched roofs look more original and allow the implementation of complex architectural solutions. The main disadvantage of this option is the complexity, and, as a result, the high cost of installation work.

Book and film by Larry Hohn "The Very Efficient Carpenter"

Reliable and easy-to-install SIP panels, which are easy to install without additional construction equipment, allow you to create a home with your own hands.

The book and film by carpenter Larry Hohn, “The Very Efficient Carpenter,” describes in detail the process of building a frame house using Canadian technology. Each chapter of the book and episode of the film is devoted to the components of the house: floors, walls, roof, as well as self-construction of the stairs. The beginning of the video describes the progress of calculations of the required quantity building materials, the necessary tools are mentioned, and the progress of the work itself is shown in detail.

Video description

Film by Larry Hohn:

The work of the master shows that the construction of a durable building requires not only experience and skill, but also the selection of materials with the necessary technical characteristics. Unfortunately, when creating a home, “there are no small details.” For example, an incorrectly created foundation or a violation of roof insulation technology leads to premature destruction of the house.

The process of constructing a frame house Source 1asku.ru

Larry Hohn's step-by-step video guide complements the book and also allows you to follow all the nuances of the house construction process in order to fully evaluate the quality of the construction team's work. This will avoid serious mistakes in construction.

Any projects of Canadian houses and cottages can be built on a turnkey basis. This service is provided by qualified specialists working using approved technologies. The progress of construction should be monitored to check the quality of the work, but at the same time, it is better to entrust the calculation of materials and the subtleties of the process to professionals.

Video description

The general progress of construction is shown in the video:

Consequences of technological errors during the construction of a building

The main mistake when building a house is inappropriate savings. SIP panels are based on wood, so it is strongly recommended to pay attention to their quality. Damp, improperly dried or rotten wood means future gaps in the walls, drafts and rapid destruction of the house.

All joints in the finished structure must be adjacent to each other as closely as possible; all gaps must be treated with sealant and construction foam. This will avoid unnecessary “cold bridges” (places of penetration of rain and wind), which contribute to the destruction of the house.

Source www.pinterest.ru

A finished house made of SIP panels, treated with sealant: the seams are tightly adjacent to each other Source tutknow.ru

Tightly fitting panels require the installation of additional ventilation, as well as the use of artificial gaps. Before starting work, you should ask the builders exactly how the house will be ventilated.

The quality of the factory-made panels themselves should be checked before installing the building. As a rule, high-quality SIP panels have smooth edges, regular shape and uniform color. It is strongly recommended not to purchase cheap Chinese-made stoves that are not adapted to harsh weather conditions.

Popular Canadian house designs

The most common house designs using Canadian technology are one-story, one-story with an attic, standard two-story, and also houses with a garage.

Traditional cottage with a spacious porch and a gable roof - best option for a small family. Finishing with plaster and wood panels, as well as laconic forms create a complete look of the building. The absence of large windows and a glassed-in veranda will save on heating the building.

One-story house with a porch and large windows Source blog-potolok.ru

Original architecture one-story building with an attic is created due to the irregular shape of the windows. The gable roof used in the architectural design prevents moisture accumulation and protects the roof from leaks. A glazed porch is a miniature analogue of a summer veranda.

Porch two-story house adjacent to the end wall Source: seattlehelpers.org

The combination of a small terrace, stone finishing and plaster gives the two-story house solidity and good quality. Wherein, architectural solution very compact and budget-friendly: the gable roof is easy to install, heating costs are kept to a minimum thanks to the open porch and terrace on the second floor.

Solid two-storey house with large windows and a terrace Source ekzo.by

Facing with natural stone and brick – the right way to give exclusivity and reliability to an affordable and laconic home. Small attic windows, originally decorated chimneys and a modest porch give the building a complete look. An organically built-in garage with small windows can be used as an outbuilding.

Two-story house with attic and built-in garage Source belarusinfo.by

Video description

Experience shows that there are moments in the construction of a house where it is absolutely not worth saving, but there are nuances where you can not only save, but rationally spend the budget (which is a kind of reasonable saving).

What to choose - comparison of prices

Houses using Canadian technology, built by qualified specialists using high-quality materials, are an excellent option for suburban housing. Ordering a turnkey frame house ensures that many technical nuances are taken into account, allowing you to create a durable structure. To simplify your choice, below are prices from developers for Canadian turnkey houses:

Source tr.skopelitissa.com	Source dekardkarkas.ru	Source dekardkarkas.ru
7.5x8.8 from 5.1 million ₽	7.5x9.8 from 5.3 million ₽	8.4x9.9 from 5.9 million ₽
Source dekardkarkas.ru	Source dekardkarkas.ru	Source sk-domostroi.ru
8.65х9.75 from 5.3 million ₽	8x13 from 6.4 million ₽	11.8x10 from 7.2 million ₽
Source sk-domostroi.ru	Source sk-domostroi.ru	Source vachdom.ru
6x6 from 2.9 million ₽	6x8 from 4.2 million ₽	6x8 from 3.7 million ₽
Source www.cottage.ru	Source myfeo.ru	Source dom-expert.by
8x8 from 4.1 million ₽	9.5x10 from 4.9 million ₽	8x10 from 4.6 million ₽

Today we will introduce you to the Canadian community, which is located near the city of Trinity in Newfoundland and Labrador. There is a saying in Canada: “if you build it, they will come.” IN in this case we mean guests, and the building is a picturesque seaside house, called “Crow’s Nest” due to its location.

It is constantly filled with numerous relatives and friends who have come to visit. This tradition was started by psychologist and business owner Brenda McIntyre, who was the first to design and build a house of approximately 130 square meters, flattered by the stunning view of the sea bay. Such beauty soon led to a massive flock of guests, acquaintances and relatives who wanted to spend at least a few days here. As a result, McIntyre had to add an additional approximately 150 square meters, located a short walk down the hill from the main structure and called "The Boathouse". After some time, this became not enough, since there was a catastrophic shortage of sleeping places, so soon a new sleeping house called “Neighbor” appeared with the possibility of accommodating several more people. Let's take a closer look at all three dwellings.

Who lives here: Brenda McIntyre.
Address: Port Rexton, Newfoundland and Labrador, Canada.
Size: The Crow's Nest area is 130 square meters; “Ellinga” – 150 square meters; “Neighbor” – 40 square meters.

"Crow's Nest"

The main technique in the construction of the main dwelling was a huge amount of glazing, so that natural light came in not only through the high windows, but also through the glass openings built into the doors. Thus, the author of the project wanted to emphasize as much as possible the connection between the traditions of the past and the development of modern technologies. As a result, the charming house blended completely harmoniously into the surrounding landscape. Light straw tones were used as facade shades in combination with light blue frames and railings of the main staircase.

The owner gravitates towards a delicate combination of cream and sea colors, so there are many artistic canvases and miniatures in the house, cozy light covers on sofas and armchairs and curtains on the windows. Her favorite parts of the house are those places where she can admire the coastal town, the lighthouse and the ocean, and there are such places throughout the entire perimeter of the home, except, perhaps, the bathroom. So in this regard, Brenda can be considered an absolutely happy person.

One of the biggest challenges in developing the interior design was the integration of all the required rooms, that is, the living room, dining room, kitchen, bedroom and office on an area of ​​130 square meters. In the bedroom we had to install it, combined with a storage system, in order to leave as much space as possible for art objects, which were placed on the walls, on the floor, and on the furniture. To make the wooden floor appear old, specialists used spruce beams, from which the top layer of wood was removed, then lightly sanded and coated with deep sea-colored paint. To paint the floor, paint from the same company was used as for the facade.

When the bed is lowered to the sleep position, McIntyre lays down to sleep and opens his eyes in the morning to a stunning panoramic view of the ocean, experiencing the true pleasure of waking up every day.

Her home office is huddled in a small corner in the kitchen, but that doesn’t stop it from inspiring Brenda’s work with unique landscapes.

"Boathouse"

This structure was erected when McIntyre needed more space for guests. As a basis for this small house An old building was used, in which there was space for a boat and fishing gear on the lower floor, and an attic space on the second floor. The color scheme here is darker, since the facade of the building is painted red, and the trim, railings and stairs are dark green.

In a funny twist, McIntyre sold her boat before the Boathouse even came into existence. Therefore, now this building with four-meter ceilings plays the role of a workshop.

Brenda found a large Louis Vuitton poster in New York, and now it covers the part of the bed that is visible when it is folded.

To maximize the space, the owner of the house played with a visual perspective that leaves the impression that you are above the water. For example, in the kitchen, each zone is raised above the floor and painted in checkerboard colors, as if several separate spaces are arranged in one room, which together create the illusion of some kind of infinity.

Kitchen cabinets are made according to individual project, and their doors are painted as if they had been sprayed on with a spray can that is used in auto repair shops. In this case, it is a shade called “asphalt”.

It enriches the color of the kitchen, pairing beautifully with the horizontal windows framed by classic white subway tiles.

Too narrow a space has become a problem when organizing the living room, dining room and kitchen. Therefore, a long sofa was installed along one of the walls, with a lot of seating, but at the same time leaving a sufficient amount of free space.

Overly bright art and furniture pieces forced Brenda to decorate the walls and ceiling in neutral, soothing tones.

There was also room in the house for a tiny but very cozy dining room overlooking Trinity Bay with light, light furniture. The floors throughout the house are made of very durable garage material, so they are reliable and do not require special maintenance.

The bathroom, for which too narrow a space was allocated, was specially decorated with materials that contrast in texture and color: red tiles and white paint. As a result, its visual area has increased significantly.

A porthole mirror also adds a creative touch to the space and doubles as a storage system.

"Neighbour"

The third building was erected not far from the Boathouse and, above all, was conceived as a sleeping area equipped with convenient storage systems. It has its own small patio that overlooks the water, but there is no kitchen or bathroom.

The Neighbor is essentially a second bedroom for two main houses, which sometimes have so many guests that there aren't enough beds for everyone.

Categories:
Places: .

.

.

Share link on Facebook

Share link on Twitter

In contact with